Performing bandwidth usage rollups

Then lets check everything together:
ok, let check it together.

  1. WAN IP on the main page of the router. Please, compare it with IP there: https://www.yougetsignal.com/tools/open-ports/ , they should match
  2. Local IP in the port forwarding rule, it should be the same as IP of your PC with storagenode
  3. nslookup your.ddns.address 8.8.8.8 should return the same IP as p.1
  4. If you do not have a DDNS hostname, it’s time to create it: Step 3. Setup Port Forwarding - Storj Node Operator Docs
  5. Firewall. It should have an incoming rule to allow any traffic from any source to the TCP 28967 and UDP 28967 port and your PC as a destination. If you have any outgoing rule, then you should create an outgoing rule to allow any traffic from your PC as a source and any host with any port as a destination: