# Cleanup before Hashstore and migration to it

**URL:** <https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636>\
**Category:** Node Operators\
**Created:** [August 28, 2025, 11:35am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636 "2025-08-28T11:35:07Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 28, 2025, 11:35am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/1 "2025-08-28T11:35:07Z")

</div>

Hello guys,

as you have already probably read there will be a migration to Hashstore soon. I have some old (2023) and new (2025-August) nodes running and compare the state between them.

For Hashstore to work well it’s time to clean-up especially the old nodes.

Here are my questions regarding the clean-up:

1. Is the folder “garbage” not beeing used anymore and can be deleted? I don’t see it on my new nodes and I assume all the mechanics from “garbage” went into “trash”.

2. I assume everything in “temp” can be deleted which is older than 10 days? I had there files from 2023 and 2024 and deleted them. But I stopped the node for sure and restarted it

3. The storage-dir-verification is still beeing used or? It’s actually a very vital file, if you lose it, it cannot be restored and the node is lost by my knowledge. Does anyone know a restore-method?

Then let’s move to the migration to hashstore.

I’m running the new nodes with Linux and Docker.

1. How do I manually start the active or complete migration to Hashstore? Is it in the docker run command or config.yaml-file? I know it’s a one way ticket but I would try it with the new nodes from 2025-August. Then I can check if I like it or am more lined towards post-poning.

Thanks and kind regards,

Walter

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 28, 2025, 2:54pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/2 "2025-08-28T14:54:28Z")

</div>

The migration is kinda easy to initiate, I figured it out now.

Stop the docker node: sudo docker stop STORJ-1

Then remove it: sudo docker rm STORJ-1

When you have the STORJ-1 folder, with your STORJ-Content just go to there with cd STORJ-1 → cd storage → hashstore → meta

Then with the echo-orders you are just re-writing the values of the files from false to true. You could also just enter the files with a file-manager like WinSCP and write true into them.

Here for all four sattelites:

echo ‘{“PassiveMigrate”:true,“WriteToNew”:true,“ReadNewFirst”:true,“TTLToNew”:true}’ \> 1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE.migrate  
echo ‘{“PassiveMigrate”:true,“WriteToNew”:true,“ReadNewFirst”:true,“TTLToNew”:true}’ \> 12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S.migrate  
echo ‘{“PassiveMigrate”:true,“WriteToNew”:true,“ReadNewFirst”:true,“TTLToNew”:true}’ \> 12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs.migrate  
echo ‘{“PassiveMigrate”:true,“WriteToNew”:true,“ReadNewFirst”:true,“TTLToNew”:true}’ \> 121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6.migrate

echo -n ‘true’ \> 1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE.migrate\_chore  
echo -n ‘true’ \> 12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S.migrate\_chore  
echo -n ‘true’ \> 12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs.migrate\_chore  
echo -n ‘true’ \> 121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6.migrate\_chore

Then re-run with docker run.

If you forget to set the log-level back to info, like I did, you can still guess the progress with:

iostat -xz 1

There check the device which is having high read rate and when it drops to the normal you can guess it is finished.

---

<div class="post-metadata">

**Author:** ![mike](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/mike/32/1127_2.png) [@mike](https://forum.storj.io/u/mike)\
**Post date:** [August 28, 2025, 8:44pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/3 "2025-08-28T20:44:34Z")

</div>

> [@Walter1](#):
>
> Is the folder “garbage” not beeing used anymore and can be deleted? I don’t see it on my new nodes and I assume all the mechanics from “garbage” went into “trash”.

Correct - it was a temp location after bloom/gc.

> [@Walter1](#):
>
> I assume everything in “temp” can be deleted which is older than 10 days? I had there files from 2023 and 2024 and deleted them. But I stopped the node for sure and restarted it

Yes.  
It’s used for temp storage during uploads. Some versions of the node was worse at keeping crap in there 🙂

> [@Walter1](#):
>
> The storage-dir-verification is still beeing used or? It’s actually a very vital file, if you lose it, it cannot be restored and the node is lost by my knowledge. Does anyone know a restore-method?

It is still used, and indeed vital.  
When a node start it checks for it, and if not found refuses to start. However, if deleted by mistake I would expect it can just be recreated as an empty file. It looks like its populated with content (all 32 bytes) when the read checks are running every x minutes.

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 28, 2025, 8:48pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/4 "2025-08-28T20:48:50Z")

</div>

Thanks alot for the answers!

I have started the migration on a newer node and by the data it is completed. Somehow in the log info I’m getting the message that still piecestore is beeing used. Why is hashstore not being used?

Is the migration not fully complete? I got .restore-files for three satellites, saltlake is missing. Or is the node too new? Just started some days ago, not even vetted on AP1. The vetting is really fast nowadays, took only two days for most satellites.

---

<div class="post-metadata">

**Author:** ![mike](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/mike/32/1127_2.png) [@mike](https://forum.storj.io/u/mike)\
**Post date:** [August 28, 2025, 9:14pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/5 "2025-08-28T21:14:21Z")

</div>

> [@Walter1](#):
>
> in the log info I’m getting the message that still piecestore is beeing used

Lets see the logs

Also, do you have any data in the storage/blobs/ folders or are they all empty after migration?

If the migration is complete, you should see something like this in the logs:

> `2025-08-28T21:07:57Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”}`  
> `2025-08-28T21:07:57Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE”}`  
> `2025-08-28T21:07:57Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6”}`  
> `2025-08-28T21:07:57Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”}`  
> `2025-08-28T21:07:57Z INFO piecemigrate:chore all enqueued for migration; will sleep before next pooling {“Process”: “storagenode”, “active”: {“12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”: true, “1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE”: true, “121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6”: true, “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”: true}, “interval”: “10m0s”}`

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 28, 2025, 9:23pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/6 "2025-08-28T21:23:23Z")

</div>

Yeah the storage blobs were all empty. I just took the risk and deleted all the folders, each per satellite and then the whole blobs folder as well.

Only these four folders remain:

 ![grafik](https://storj-s3.bcdn.literatehosting.net/original/3X/a/1/a179ce70577a7da734dd3b5398fbd7bd0f3336f9.png)

 ![grafik](https://storj-s3.bcdn.literatehosting.net/original/3X/6/6/667215f684d701ae6214ee8a556596c106e0cc1b.jpeg)

Hopefully the screenshot is readable.

2025-08-28T21:08:33Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:33Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:33Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:33Z INFO piecestore downloaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “GET”, “Offset”: 0, “Size”: , “Remote Address”: “”}  
2025-08-28T21:08:33Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:34Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”}  
2025-08-28T21:08:34Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”}  
2025-08-28T21:08:34Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE”}  
2025-08-28T21:08:34Z INFO piecemigrate:chore enqueued for migration {“Process”: “storagenode”, “sat”: “121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6”}  
2025-08-28T21:08:34Z INFO piecemigrate:chore all enqueued for migration; will sleep before next pooling {“Process”: “storagenode”, “active”: {“12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”: true, “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”: true, “1wFTAgs9DP5RSnCqKV1eLf6N9wtk4EAtmN5DpSxcs8EjT69tGE”: true, “121RTSDpyNZVcEU84Ticf2L1ntiuUimbWgfATz21tuvgk3vzoA6”: true}, “interval”: “10m0s”}  
2025-08-28T21:08:35Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:35Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:36Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }  
2025-08-28T21:08:37Z INFO piecestore uploaded {“Process”: “storagenode”, “Piece ID”: “”, “Satellite ID”: “12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S”, “Action”: “PUT”, “Remote Address”: “”, “Size”: }

I’m a bit scared about the piecestore after the blue INFO. I’ve seen screenshots here in the forum where it switched to hashstore.

---

<div class="post-metadata">

**Author:** ![mike](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/mike/32/1127_2.png) [@mike](https://forum.storj.io/u/mike)\
**Post date:** [August 28, 2025, 9:38pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/7 "2025-08-28T21:38:47Z")

</div>

> [@Walter1](#):
>
> I’m a bit scared about the piecestore after the blue INFO. I’ve seen screenshots here in the forum where it switched to hashstore.

Thats just the way the node logs it. You are fine, all is hashstore 😃  
Mine looks the exact same, and I know it’s all hashstore. Here’s the realtime files being used:

> `storage/blobs# fatrace -ct`  
> `23:39:08.663140 storagenode(2958155): W /opt/sn275/storage/hashstore/12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs/s0/b6/log-00000000000005b6-00000000`  
> `23:39:08.663424 storagenode(2958155): W /opt/sn275/storage/hashstore/12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs/s0/meta/hashtbl-000000000000005f`  
> `23:39:08.739380 storagenode(2958155): R /opt/sn275/storage/hashstore/12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S/s1/90/log-0000000000000290-00000000`  
> `23:39:08.752506 storagenode(2958155): R /opt/sn275/storage/hashstore/12EayRS2V1kEsWESU9QMRseFhdxYxKicsiFmxrsLZHeLUtdps3S/s1/ba/log-00000000000007ba-00000000`

I’m not sure if it causes issues to delete the entire blobs folder, in my case I’ve just left it in place including the sat folders, but all the subfolder 22…z7 I’ve removed.

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 28, 2025, 9:43pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/8 "2025-08-28T21:43:43Z")

</div>

So you are also getting the lines of piecestore after INFO and not hashstore? blobs deletion shouldn’t be a problem, it all just writes and reads into hashstore and subfolders, this was at least my immediate impression.

---

<div class="post-metadata">

**Author:** ![mike](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/mike/32/1127_2.png) [@mike](https://forum.storj.io/u/mike)\
**Post date:** [August 28, 2025, 10:57pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/9 "2025-08-28T22:57:47Z")

</div>

Yes - same logs, your node is using hashstore even though it writes piecestore in the logs.

---

<div class="post-metadata">

**Author:** ![Alexey](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/alexey/32/41_2.png) [@Alexey](https://forum.storj.io/u/Alexey)\
**Post date:** [August 29, 2025, 7:06am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/10 "2025-08-29T07:06:35Z")

</div>

> [@mike](#):
>
> I would expect it can just be recreated as an empty file

It will not. To re-create it you need to use the setup command, which is dangerous for the same reason - without a secure check like this you may also place it in a wrong location or from the other identity and the node will be disqualified.

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 29, 2025, 8:36am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/11 "2025-08-29T08:36:10Z")

</div>

The migration is still running for the HDD-Nodes. The SSD-Nodes, the new one, read with 6000 r/s in iostat the HDD just with ~100 and ~95% utilization, basicly 100% usage of the HDD while migrating.

Is there some formula to calculate the bunch of pieces into TB? The node has like 5 TB total usage. It has 3,15 TB in usage and a whopping 1,85 TB in trash. Can’t explain the high trash amount. That’s why I’ve chosen it for migration, hopefully the trash get’s lower.

![grafik](https://storj-s3.bcdn.literatehosting.net/optimized/3X/7/a/7aefef65b64af726d3e0a58028473adcf2f17f35_2_690x21.png)

Am currently at bunch 780.000. Can this number translated into TB?

---

<div class="post-metadata">

**Author:** ![flo82](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/flo82/32/10747_2.png) [@flo82](https://forum.storj.io/u/flo82)\
**Post date:** [August 29, 2025, 8:41am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/12 "2025-08-29T08:41:37Z")

</div>

size is in bytes - translate it to TB

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 29, 2025, 8:47am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/13 "2025-08-29T08:47:48Z")

</div>

piecemigrate:chore processed a bunch of pieces {“Process”: “storagenode”, “successes”: 800000, “size”: 153411985920}

So 153411985920 just eqals 153 GB? It’s then like a month migrating 5 TB (5000 GB / 200 GB daily = 25 days).

Somehow I still receive new Ingress traffic for it:

 ![grafik](https://storj-s3.bcdn.literatehosting.net/original/3X/2/d/2db13106652fa7617f1048563c97c21ad4e4ffc3.png)

---

<div class="post-metadata">

**Author:** ![flo82](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/flo82/32/10747_2.png) [@flo82](https://forum.storj.io/u/flo82)\
**Post date:** [August 29, 2025, 9:05am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/14 "2025-08-29T09:05:24Z")

</div>

correct. if YOU initiated the migration, then you’ll still receive ingress.

They are discussing if they will put ingress on hold if migration is started “central”.

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 29, 2025, 1:01pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/15 "2025-08-29T13:01:47Z")

</div>

Stopping the node, removing it and change the config-file should be possible while it is migrating? Or would it be better to let it now run through the ~30 days?

---

<div class="post-metadata">

**Author:** ![EasyRhino](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/easyrhino/32/1133_2.png) [@EasyRhino](https://forum.storj.io/u/EasyRhino)\
**Post date:** [August 29, 2025, 3:29pm UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/16 "2025-08-29T15:29:42Z")

</div>

> [@Walter1](#):
>
> Is there some formula to calculate the bunch of pieces into TB? The node has like 5 TB total usage. It has 3,15 TB in usage and a whopping 1,85 TB in trash. Can’t explain the high trash amount. That’s why I’ve chosen it for migration, hopefully the trash get’s lower.

If, for migration purposes, a piece is equal to a single ‘blob file on the old file system (i don’t know if it’s the same meaning) I was just recently trying to copy over a 2.5 or 3TB node across disks and it was over 30 million files. So… a lot!

---

<div class="post-metadata">

**Author:** ![Alexey](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/alexey/32/41_2.png) [@Alexey](https://forum.storj.io/u/Alexey)\
**Post date:** [August 30, 2025, 2:20am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/17 "2025-08-30T02:20:59Z")

</div>

We do not discussing to make it, I believe that’s a bug. The node should handle all operations normally.  
The migration process is slow on purpose to make a room for the customers.

---

<div class="post-metadata">

**Author:** ![jammerdan](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/jammerdan/32/1121_2.png) [@jammerdan](https://forum.storj.io/u/jammerdan)\
**Post date:** [August 30, 2025, 2:30am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/18 "2025-08-30T02:30:52Z")

</div>

> [@Alexey](#):
>
> to make a room for the customers.

Then the used space should not grow to make ingress stop.

---

<div class="post-metadata">

**Author:** ![Alexey](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/alexey/32/41_2.png) [@Alexey](https://forum.storj.io/u/Alexey)\
**Post date:** [August 30, 2025, 2:35am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/19 "2025-08-30T02:35:28Z")

</div>

> [@Alexey](#):
>
> I believe that’s a bug.

Especially when we have nodes which doesn’t behave like this. So, it must be some factors happening together.  
I shared those reports with the team, however, it would be better to find a way how to reproduce.

---

<div class="post-metadata">

**Author:** ![Walter1](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/walter1/32/7825_2.png) [@Walter1](https://forum.storj.io/u/Walter1)\
**Post date:** [August 30, 2025, 6:42am UTC](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636/20 "2025-08-30T06:42:20Z")

</div>

Thanks alot. 🙂  
But the node can be stopped while migrating and the restarted? It should be, because there will be new verion rollouts and by upgrading, like 1.136 the node would also restart.

[Next page](https://forum.storj.io/t/cleanup-before-hashstore-and-migration-to-it/30636.md?page=2)
