# No bandwidth or disk space being used by storage node

**URL:** <https://forum.storj.io/t/no-bandwidth-or-disk-space-being-used-by-storage-node/1617>\
**Category:** troubleshooting\
**Created:** [September 11, 2019, 12:02pm UTC](https://forum.storj.io/t/no-bandwidth-or-disk-space-being-used-by-storage-node/1617 "2019-09-11T12:02:28Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Nastea](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/nastea/32/62_2.png) [@Nastea](https://forum.storj.io/u/Nastea)\
**Post date:** [September 11, 2019, 2:48pm UTC](https://forum.storj.io/t/no-bandwidth-or-disk-space-being-used-by-storage-node/1617/6 "2019-09-11T14:48:04Z")

</div>

This has some identity check stuff, it’s a good thread. Otherwise it might be dns/forwarding…

> [@My Node is OFFLINE for 2 hours](https://forum.storj.io/t/my-node-is-offline-for-2-hours/736/2):
>
> It should connect in seconds. There are a few things you should check. Start with checking the port. On [https://www.yougetsignal.com/tools/open-ports/?port=28967](https://www.yougetsignal.com/tools/open-ports/?port=28967) you can fill in the domain or IP you are using in the run command. Then check the port. If it’s closed, it could still be several things. Make sure the WAN IP you see in your router settings matches the IP shown on the above page. Make sure your port forward is set up correctly. That means no filter on incoming IPs, forwarding to th…

---

_[View the full topic](https://forum.storj.io/t/no-bandwidth-or-disk-space-being-used-by-storage-node/1617)._
