# Performance on single-bucket multicalls **URL:** \ **Category:** Product Discussions\ **Created:** [October 2, 2023, 2:21pm UTC](https://forum.storj.io/t/performance-on-single-bucket-multicalls/23915 "2023-10-02T14:21:25Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Alexey](https://storj.bcdn.literatehosting.com/user_avatar/forum.storj.io/alexey/32/41_2.png) [@Alexey](https://forum.storj.io/u/Alexey)\ **Post date:** [October 3, 2023, 7:43am UTC](https://forum.storj.io/t/performance-on-single-bucket-multicalls/23915/4 "2023-10-03T07:43:45Z")
Yes, using a different passphrases or/and prefixes shouldn’t affect neither latency nor speed, both are depends on location, your bandwidth and hardware power (CPU/RAM), it also depends on used protocol - if you have a wide bandwidth, the native protocol can be better, if it’s limited or you do not have resources on the device where you plan to use uplink, then you can use S3 protocol. See > [@Hotrodding Decentralized Storage](https://forum.storj.io/t/hotrodding-decentralized-storage/15228): > > Preface Greetings everyone. We have been working on some exciting performance enhancements and wanted to share them with the community and solicit feedback. I hope you have as much fun with this as I have had! Before we commit this to our documentation we’d like to get your feedback and questions. -Dominick Storj DCS Performance Overview Performance Basics In decentralized storage, the concept of parallelism has a huge effect on performance. As you will read below we can enact parallel ef… --- _[View the full topic](https://forum.storj.io/t/performance-on-single-bucket-multicalls/23915)._