Hello, i’m running my node on version v1.123.4 and it is a little bit strange that i got the error that QUIC is misconfigured. I did on pingdom a check and got the following: - started - - from: St.Petersburg, Russia - QUIC: dialed node in 116ms - QUIC: pinged node in 54ms - QUIC: total: 169ms -…

I don’t know what your specific config issue is: but if you’re “Status = Online”, and your “Last Contact” is recent (or zero)… then your node is fine and QUIC status can be ignored.

[image] QUIC misconfiguration in v1.86.1 troubleshooting There hasn’t been any progress on those QUIC bugs. It’s considered low priority because apparently uplinks quite rarely use QUIC in production. I suppose we’re recommending not to worry about what the dashboard says …

Hello @emitremmus , Welcome back! You may check the node itself (replace external.host.tld with your own domain or public IP): http://external.host.tld:28967, it should return something like { "Statuses": null, "Help": "To access Storagenode services, please use DRPC protocol!", "AllHealthy"…

Yes, i got this message, when i try with my own domain. { “Statuses”: null, “Help”: “To access Storagenode services, please use DRPC protocol!”, “AllHealthy”: true }

I’ve got this { “Statuses”: null, “Help”: “To access Storagenode services, please use DRPC protocol!”, “AllHealthy”: false } What’s wrong with my node?

Look in the dashboard. Likely low status.

Hello, I have two nodes, each in a different house, with a different IP, different networks, and different hardware. Suddenly, I have the same “QUIC misconfigured” issue on both nodes. If I run a ping test, everything is OK. If I run this test, it looks fine: { “Statuses”: null, “Help”: “To acces…

[image] Luci: “AllHealthy”: true Your node works correctly. What are you trying to debug? If you simply don’t like red “misconfigured” text you have few options: don’t open dashboard, so you won’t have to look at it. remove it with ad blocker browser extension. Read the linked thread for …

Hello, in the end, the “QUIC misconfigured” message resolved itself, now it shows “OK” on both nodes. I was worried because Storj sent me several messages like this: “Your Storage Node on the Saltlake satellite has gone offline. If your node remains offline, you may be suspended or disqualified.” “…

[image] Luci: ow it shows “OK” on both nodes QUIC connectivity is validated every hour, as far as I remember, so if it’s flaky, it may be tolling before ok and misconfigured. [image] Luci: “Your Storage Node on the Saltlake satellite has gone offline. If your node remains offline, you ma…

QUIC misconfigured but ping says OK

Node Operators troubleshooting

arrogantrabbit March 15, 2025, 3:56pm 3