ptC7H12
September 21, 2023, 6:28pm
2
Portcheck my lead into a false positive fealing as most Portchecker only check TCP
What does it say, when you look at: http://[IP-OF-NODE]:28967
It should show you this:
{
"Statuses": null,
"Help": "To access Storagenode services, please use DRPC protocol!",
"AllHealthy": true
}
This means all is okay! If you don’t see this, means that our Node is not reachable from outside and you should check your Router settings/portforwading.
And look into this helpfull post:
It should connect in seconds. There are a few things you should check.
Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=28967 you can fill in the domain or IP you are using in the run command. Then check the port.
If it’s closed, it could still be several things.
Make sure the WAN IP you see in your router settings matches the IP shown on the above page.
Make sure your port forward is set up correctly. That means no filter on incoming IPs, forwarding to th…
1 Like