[ScreenClip] And yet my filesystem saids 14.49TB is being used. Why don’t the dashboard’s figures even agree, and why are they both under what’s actually used?

[image] Disk usage discrepancy? troubleshooting Hello @t0x , Welcome back! @t0x @gingerbread233 The suggestions are the same, you need to have all filewalkers finished their work, remove data of the untrusted satellites and make sure that you do not have errors related …

Please install stbb from GitHub - elek/stbb · GitHub and run this command (replace the path to yours): stbb hashstore stat /opt/storj/storagenode1765/hashstore/12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs/s0/meta/hashtbl-00000000000001b8 and for s1 too

Sorry for the late reply, should the node be stopped then?

I performed this while the node was stopped: ▶ 12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs/s0/meta/hashtbl-0000000000000039 ▶ 12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs/s1/meta/hashtbl-0000000000000039

[image] mr.Viking: “12L9ZFwhzVpuEKMUNUqkaTLGzwY9G24tbiigLiXpmZWKwmcNDDs”, “store”: “s0”, “stats”: {“NumLogs”:2605,“LenLogs”:“2.5 TiB”, If 2.5 TiB for s0 is true there should be like 5 TiB in EU1 folder… :thinking: I guess something wrong with hashtables, use write-hashtbl tool to write new …

But the EU folder is actually more than 5TB :slight_smile: [image] mr.Viking: eu1- Average disk space: 1.01 TB, du -sh: 5.3T

This is why you may try to use a write-hashtbl tool to rewrite your hashtables.

Could you please provide an example of the command to run it? Also, I would like to remind you that the issue had been detected even before the hashstore migration.

[image] Hashstore error preventing node restart troubleshooting Nobody has submit such PR so far, I would like to invite you to be a first one slight_smile Right now you can build this tool by installing GO for Windows, then use then run like described in th…

In progress… What are the next steps once it finishes? Should I run the node or stbb again?

Disk usage discrepancy?

Node Operators troubleshooting

Alexey August 1, 2026, 6:41am 1267

Did you disable the scan on startup? If yes, please enable it back, it might help too: