Hello I just set up my node today. I benn waited 2 hours but it’s still said OFFLINE. I tried to restart it but it is the same OFFLINE. Do I need to wait more than 2 hours or is it a problem? Thanks!

It should connect in seconds. There are a few things you should check. Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=28967 you can fill in the domain or IP you are using in the run command. Then check the port. If it’s closed, it could still be several things…

Please check your port forwarding rule on your router, it should forward TCP port 28967 to your PC with Docker. Make sure that the IP in the port forwarding rule is the same as the IP of your PC. Check that your external address on https://www.yougetsignal.com/tools/open-ports/ matches the WAN IP o…

same answer also applies to you Node is OFFLINE

[image] Node is OFFLINE same answer also applies to you to me? I don’t have a problem :wink: I was just directing the OP to a very similar thread…

Hi all, I just set up a node for the 1st time on Raspberry Pi. It starts correctly but stays Offline and also doesn’t see any neighbours. There seems to be a bootstrap issue as far as I can read from the logs. [37] Any help is appreciated, Thanks Wunderbaer

Hello @wunderbaer , Welcome to the forum! Please, start from there: [image] My Node is OFFLINE for 2 hours FAQ It should connect in seconds. There are a few things you should check. Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=2896…

Thanks for redirecting me. I read through this earlier but it seems all correct imho. Port shows open (after docker has launched - prior to that it’s shown closed which makes sense for me as no service in runnning on this port). All identity files are in place: [53] The Archive file was used as…

Yes, your ADDRESS option, it should have an address with port, for example -e ADDRESS=your.ddns:28967 Also, your DDNS address should be resolved to the same public IP as you can see on https://www.yougetsignal.com/tools/open-ports/?port=28967 and the same as your WAN IP on your router. To check yo…

This is the script I am using to start the storagenode: [35] Port seems to be open: [20] Still the dashboard shows offline: [40]

Anybody who can help me understand this error message: Unrecoverable error {“error”: "bootstrap node error: STORAGE : 12ChqH5FxHK3X2o5pR9L3yp8JzAzGHFUNwLAUMmknTaKQY9ZQFd unable to fetch unverified peer identity node address bootstrap.storj.io:8888 : transport error: context deadline exceeded; Thank…