My node is offline

[Quort]

Hello. My node is offline. Help me, please.

[nerdatwork]

Welcome to the forum @Quort!

My Node is OFFLINE for 2 hours

It should connect in seconds. There are a few things you should check. Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=28967 you can fill in the domain or IP you are using in the run command. Then check the port. If it’s closed, it could still be several things. Make sure the WAN IP you see in your router settings matches the IP shown on the above page. Make sure your port forward is set up correctly. That means no filter on incoming IPs, forwarding to th…

[Quort]

Port 28967 is closed. IP-addresses is different. Use Windows 10 and NO-IP DUC v4.1.1.

[nerdatwork]

@Quort

IP-addresses is different

You are using No-IP then it shouldn’t matter. Show me your docker run command and remove any personal info from it.

[Quort]

I use windows gui version.

[nerdatwork]

What does config.yaml have for this?

contact.external-address:

[Alexey]

@Quort

IP-addresses is different

If you mean the WAN IP and public IP are different, then you have only three options:

• switch the ISP to one, who offer the public IP instead of “gray”;
• talk with your ISP and ask them how to obtain a public IP;
• use the VPN services with port forwarding option such as PIA, portmap.io, ngrok, PureVPN, etc.

[Quort]

storj777.ddns.net:28967

[nerdatwork]

Have you setup port forwarding?

[Alexey]

I think it’s solved in the Russian thread with the same question