No connection to my Dashboard

[kurok25]

Hi, i´m new to storj.
Install today my node. My router is Fritzbox 7360. Port forwarding done, firewall allowed but no connection to local.host. After that disable windows firewall, set Exposed Host in my router, nothing, no connection, pls help.

[Alexey]

Hello @kurok25,
Welcome to the forum!

Please, go through the check-list first:

My Node is OFFLINE for 2 hours

It should connect in seconds. There are a few things you should check. Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=28967 you can fill in the domain or IP you are using in the run command. Then check the port. If it’s closed, it could still be several things. Make sure the WAN IP you see in your router settings matches the IP shown on the above page. Make sure your port forward is set up correctly. That means no filter on incoming IPs, forwarding to th…

[donald.m.motsinger]

You really should not expose your Windows PC to the whole Internet.

[msheppie]

I have the same issue, did you ever resolve this ? I noticed post was from a few months back ?

[Alexey]

The solution at the moment to use the Chrome or Firefox, probably without some extensions, which could block the JS.