One more time I have issues

[Alexey]

Hey @marcelosandrini,
Please use these guides:
Offline checklist for docker nodes:

My Node is OFFLINE for 2 hours

It should connect in seconds. There are a few things you should check. Start with checking the port. On https://www.yougetsignal.com/tools/open-ports/?port=28967 you can fill in the domain or IP you are using in the run command. Then check the port. If it’s closed, it could still be several things. Make sure the WAN IP you see in your router settings matches the IP shown on the above page. Make sure your port forward is set up correctly. That means no filter on incoming IPs, forwarding to th…

Offline checklist for Windows nodes:

Node stopped responding overnight. Still shows OFFLINE after restart

ok, let check it together. WAN IP on the main page of the router. Please, compare it with IP there: https://www.yougetsignal.com/tools/open-ports/ , they should match Local IP in the port forwarding rule, it should be the same as IP of your PC with docker nslookup your.ddns.address 8.8.8.8 should return the same IP as p.1 Firewall. It should have an incoming rule to allow any traffic from the any source to the TCP 28967 port and your PC as a destination. If you have any outgoing rule, then y…

The general offline troubleshooting guide:

Node offline troubleshooting