QUIC check fail - WAN IP different than public IP

[Alexey]

Hello @artest113,
Welcome to the forum!

@artest113

because my WAN IP is different with my public IP.

In that case the port forwarding will not work.

WAN IP address different than external address

The difference is, that if your ISP uses CGN, you basically sit behind another NAT router and your router will not be reachable from the Internet. With a service like portmap.io you establish a VPN connection to them and then you setup a portforwarding at their end and they route all packets through the VPN tunnel to you. But reading your last comment, your IP from your router matches the reported IP from ipify.org. Who knows what happened earlier (browser cache?).

You have a few options:

• contact your ISP and ask them for a public IP, it may be dynamic, but must be a public (the WAN IP will match your public IP), you may say to ISP’s staff that you need access to your security IP cam from anywhere to do not explain Storj;
• switch to other ISP, who offer a public IP;
• use VPN services with a port forwarding feature such as portmap.io, PIA, PureVPN, AirVPN, own VPN server with a public IP, etc.

If you have several routers, but the internet facing router/modem has a WAN IP which match the public IP, then you only need either:

• make another port forwarding rule, but on the internet facing router/modem to forward traffic to the local IP of your other router (which would be rendered on the second router as a WAN IP);
• or switch the internet facing router/modem to a bridge mode, to make your router only the one router in your network.