can anyone help me with instructions to setup second node as additional storage node drive different machine and id same IP address

MOST things will be the same, but you’ll have to use a different port for the second node. Change the following parameters. -p 28968:28967 -e ADDRESS="your.ddns.tld:28968" Note that the second port in the -p parameter still remains 28967, that’s because the container internally still uses that po…

The process is exactly the same as setting up your first node: you need a new invitation, create an identity from that, set up the storagenode software, etc. Note that you can’t reuse the same email address for the new invitation. Note also that the satellites will treat both nodes as effectively …

When trying to setup the port forwarding for my second node on a different machine, my router complained that the external address 28967 was already in use (which is true as my first node is using 28967 as the external address ) . So if both machines use the same ddns name since I only have one pub…

Check my previous post again. The address and first port in the mapping use a different port. That port should also be forwarded on your router.

Thank you for the fast reply. I did not notice the difference. I’ll give that a try.

Ok. it looks like the router is happy. I used this port forwarding (for example) external port 68968, internal 68968 to second machine internal static IP.

I thought there are only 65535 ports available tcp/udp

The internal port (at the right side of the colon) must be 28967 unless you changed the default 28967 in the config file

hello I want to launch a second node and I do not configure it to put it online could you help me? I have one that currently works but put the two online I do not do proxy or router port etc

[image] Second node as spare drive FAQ MOST things will be the same, but you’ll have to use a different port for the second node. Change the following parameters. -p 28968:28967 -e ADDRESS="your.ddns.tld:28968" Note that the second port in the -p parameter still remains…

I have a node running in a Win 10 system with 3 HDDs - two 1TB drives and a 750GB drive. Currently I have it set up to store the Storj files in one 1TB HDD. When that becomes full, how do I include the other two drives in this node? The v3 windows UI set up only asks for one folder to store the file…