I bet this is a simple fix. But, I decided to get a second Raspberry Pi 4 device and another 4TB external drive to my setup to run another Storj node behind my home router. I finished getting everything setup including making additional port forwards to the second device, with the port number incre…

The Uptime on the dashboard mean how long your node running, not how long it was online. So, you need to fix the error in the port mapping. The right part of the port mapping must not be changed unless you modified a listening port in the config/additional options in the docker run command. So, th…

My docker launch command: docker run -d --restart unless-stopped --stop-timeout 300 \ -p 28968:28968/tcp \ -p 28968:28968/udp \ -p 127.0.0.1:14003:14003 \ -e WALLET="REDACTED" \ -e EMAIL="REDACTED" \ -e ADDRESS="REDACTED.ddns.net:28968" \ -e STORAGE="3.32TB" \ --moun…

That change allowed it to work! Thank you. However, web dashboard doesn’t appear to work; CLI dashboard appears shows in terminal. What could prevent the CLI showing online and working, but no browser letting me access the web GUI using the external no-ip domain and port assigned by my no-ip sett…

You need to use article How to remote access the web dashboard - Node Operator to have an access to your dashboard on your phone or PC/Mac. The other way is to remove 127.0.0.1: from port mapping for the dashboard port. This will allow you to connect to you node via LAN. However, I would ask you t…

I understand. One of the storage nodes had the remote thing but I undid it to your suggestion. So now it’s all completely secure again. Last question. Is there a way to look at payout information for all nodes I would set up? Because I can see the panel information for each individual node. So, is …

[image] foxball: Last question. Is there a way to look at payout information for all nodes I would set up? Because I can see the panel information for each individual node. [image] [Tech Preview] Multinode Dashboard Binaries STORJLINGS Testfocus We published the fi…

Thanks. I will probably try that later. But I think I’ve done enough commandline stuff for a week; this is all very new to me. Thank you very much for the help. They are both online now.

Second Node setup, Status OFFLINE but uptime 1 hour+?

Node Operators troubleshooting

Alexey August 23, 2021, 8:13am 7