Hi All, I’ve downloaded and run the successrate.sh script and this is from the upload section: ========== UPLOAD ============= Rejected: 171059 Acceptance Rate: 40.468% ---------- accepted ----------- Failed: 27 Fail Rate: 0.023% Canceled: …

[image] Changelog v1.4.2 STORJLINGS [image] [image] I referring to this bug. Based on this bug your calculations no make any sense slight_smile It is a known bug, success rates are inaccurate right now.

This topic may be helpful to find out what parts are slow. [image] Guide to debug my storage node, uplink, s3 gateway, satellite STORJLINGS We have integrated a package called monkit in all storage nodes. It is very usefull for debuging. By default it will open a random po…

Did not know about those debug functions to get this, thanks for the info there, will have to get that enabled on my nodes, more information to work with for node hardware performance improvements.

@BrightSilence Thx, the debug port should come in handy, I will add the debug port. I do have the max concurrent limit set, should I remove that? It is currently set to the default value of 7 because when I had it set higher it was complaining so I figured I would just set it to what the config.ya…

@Cmdrd Thx, I was aware that those were incorrect.

[image] thebadcat: should I remove that? yes. It should not be set. The default is unlimited.

@Alexey Thx, I have changed the config.yaml to this now: # set the concurrent max request (default 7) #storage2.max-concurrent-requests: 7

Please, do not forget to save the config and restart the node.

Do in need to do a stop/start or a restart?

If you changed the config, you need to restart the node. You can do it as stop, then start or as just restart, depending on the version the command will be different. You can take this guide as a base: https://documentation.storj.io/resources/faq/system-maintenance

Upload success very low

Node Operators troubleshooting

Cmdrd May 22, 2020, 12:28am 2

It is a known bug, success rates are inaccurate right now.