Is there a possibility to install multiple nodes using the windows installer? Just rerunning the installer does not work. Why I want to do this: I have 4 network cards with dedicated unrestricted 1gbit access and I wanted to install for each network card a node with a dedicated hard drive. Does …

You can install the Windows service only one PC. We do not recommend to make a multisetup except having a different PCs and different HDDs, otherwise it will be centralization which we want to avoid. Moreover, the multisetup have a downsides as well: [image] Add multiple drive, re…

I’m wondering what the best practice for utilizing multiple hard drives is, then. Is the only viable scenario using some (single) old external HDD on my laptop, running a single node? Why does the documentation point out we need 1 CPU core per node if we won’t be able to run more than one node per…

Hello @twl , Welcome to the forum! You will not have any advantage of running multiple nodes, they will receive the same traffic as only one node, because we want to be decentralized as much as possible. You have a three options: RAID. Please, do not use RAID without a parity, you have a high ch…

Hi Alexey, thanks for your reply. I can’t use RAID. Docker didn’t work for me when i first tried out v3 and i won’t waste even more time trying to get docker to run. Why can’t I just run 1 node per CPU core like it was in v1?

To do not repeat the v2 with hundreds unreliable nodes on one PC The keyword decentralization We want to have as much nodes as possible across the world

I just setup a Windows server with 15TB of RAID6 storage. My internet connection with 1GB synchronous. I have an 8TB non-RAID disk that I’d like to add. Can I? Should I? How do I do it?

Welcome to the forum! @usd_lol It will take a while to fill up those 15TB so wait and watch your node. You can fine tune it till you get the hang of it. You can later on add another HDD but Storj strongly recommends using 1 node per HDD

You can use this to add new GUI node [image] More than one Storagenode on windows GUI Ideas & Suggestions As I spoked before there is posible to install more than 1 GUI node on windows. For this you neede. 1)Copy of you first node folder in program files with name like S…

Multiple Node Installations using Windows Gui Installer

Node Operators FAQ

Vadim December 29, 2019, 11:01am 10

You can use this to add new GUI node

but you should wait minimum your first node is vetted